Products

  1. You are here:
  2. HOME
  3. Fuel Storage Tank
  4. FT-Serial Tank

FT-Serial Tank


  • FT-Serial Tank1_b
  • FT-Serial Tank2_b
  • FT-Serial Tank3_b
  • FT-Serial Tank5_b
  • FT-Serial Tank6_b
  • FT-Serial Tank4_b
  • FT-Serial Tank7_b
  • FT-Serial Tank1_b
  • FT-Serial Tank2_b
  • FT-Serial Tank3_b
  • FT-Serial Tank5_b
  • FT-Serial Tank6_b
  • FT-Serial Tank4_b
  • FT-Serial Tank7_b
  •   INTRODUCTION

Model Numbers & Dimensions

Model NumberGross Capacity LitresStandard SFL(1)Length(mm)With(mm)Height(mm)Tare(kg)
FT1211700105302991243828964910
FT2020000180002991243828964748
FT3030500274506058243828967934
FT3838000342006058243828968037
FT686800061200121922438289614100
FT757438866950121922438289614082
FT808150073350146302438289617100
FT10010000090000146302438320018000
FT110120000110000146302438363519000

Note (1) Standard SFL is set at 90% of gross volume with standard float type overfill valve.

Options available to increase Safe Fill Level to 95% - refer overfill options.


FT-Serial Tank

◆ Self bunded with internal tank and external bund.

◆ Corner container lock castings.

◆ Internal ladder for access.

◆ Three 600mm manholes.

◆ Air breather vents for free venting.

◆ Containment compartment (internal bund) with emergency vent.

◆ Calibrated contents dip stick.

◆ Interstitial space dip stick.

◆ Top roof section designed to release water as it sits above the side rails of the tank.

◆ Lockable top sump for access points.

◆ Additional sockets,doubler pad points available to suit applications.

◆ Unit sand blasted to as2.5

◆ Underside of the base bitumen coated for protection.

◆ Paint coating to c5-1 harsh environment standard, three coats Hempel paint to 240 micron thickness.

◆ Statutory signage to suit end use location.

◆ Tank manufacture and compliance plates.